This is written for folks curious about optimizing a Helium Hotspot placement.
Most start with their antenna, which is (almost completely) the wrong approach for maximizing earnings. The only way you could make a less efficient improvement at the start is to focus on what cables to buy.
There are four fundamental aspects of an optimal Helium hotspot placement; antennas and cables are at the bottom of the list for importance.
Before we get there (relax, it’s only a few paragraphs away), let’s get a few important points out of the way:
First, while I think everyone reading this should buy at least one hotspot and place it as optimally as you can, over the long run you’ll earn far more by figuring out a way to actually use the network and not just provide coverage.
Second, if you follow and read through every link in this article you’ll be ready to make excellent decisions about the best possible hotspot placement. The whole thing (Helium, antennas, optimum hotspot placement) will take about an hour to digest and understand.
Third, if you don’t want or have the time to dive deep, you can hire me to figure out the best way Helium can work for you.
ASSUMPTIONS
1)You know that Helium is a network of Hotspots that transmit and receive radio signals, then pass those signals onto the internet. In general, the more signals a given hotspot receives, the more HNT it earns. Hotspots record all transactions on a blockchain and reward owners for providing coverage with HNT, a cryptocurrency token.
2) You have, or have ordered, or are thinking about ordering, a Helium hotspot.
3) You haven’t read every last post and thread on the internet about maximizing a hotspot placement. :)
___________________________________________________________________
Let’s dive in.
There are only a few things that really matter when it comes to your hotspot placement. Some of them will change over time, some of them are fundamental. All are driven by just one goal over the long term:
ADD VALUE TO THE NETWORK
FUNDAMENTALS FOR OPTIMUM PLACEMENT
Basically, the following fundamentals are, in order of importance:
- Hotspot Density
- Antenna “view”
- Appropriate Antenna
- Minimized & high quality connection length/cables
HOTSPOT DENSITY:
Optimum density is determined using Uber’s H3 map. The map uses (mostly) hexagons to form grids of different sizes. Each size is called a “resolution” or “res” for short. Each hex size has an appropriate density for its resolution.
Here is a dated interactive map (it stopped being updated in late fall of 2020) of density and hotspot placements. It’s color coded and fairly intuitive. Green means good density, red indicates too dense. Here’s a quick screenshot:
At each “res” there is an optimal number of hotspots per hexagon. That number can change. It is determined by a base rate of hotspots per hex plus the number of hotspots in surrounding hexes. Go ahead, read that sentence again a few times.
Yes, it’s a bit complicated. It was made this way in order to account for density differences between cities, suburbs, and rural areas.
Here’s a screenshot map of San Francisco (pulled from the HIP 17 Visualizer) to give another perspective.
Notice the green hotspots don’t have other hotspot as close to them as the orange and red ones. Red is the worst; they’re basically on top of each other and providing duplicate (or triplicate or worse) coverage, which isn’t useful to the network.
If you want to know if your location will be good, you’ll need to study HIP17.
If you read HIP17 until you understand it, you’ll be in the 1% of Helium Hotspot owners who don’t really have questions about optimum density.
It looks complicated at first, but it’s actually straightforward. If you’ve ever read about Goldilocks and the 3 Bears, you’ll have an understanding of hotspot density: Not too dense, not dense enough, but just right.
If you don’t have the time or just want to skip that part, you can hire me and I’ll help you pick the best option for your area and circumstance.
BOTTOM LINE:
You need to have optimum density for maximum earnings.
ANTENNA VIEW:
Before you go ordering the latest and greatest super-hot antenna (more on that later), make sure your antenna has a view. A “view” has three important aspects.
- Outside. Walls and even windows will block radio waves.
- High above other obstacles.
- Clear view to as much as possible.
The view of your antenna is far more important than upgrading your antenna. A higher elevation “stock” antenna (the one that comes with your hotspot) will outperform a super fancy antenna that’s low down EVERY TIME.
Get as high as reasonably possible. How high? From the American Radio Relay League’s document on antenna placement:
“To a distant receiving station, a transmitting antenna at 120 feet will provide the effect of approximately 8 to 10 times more transmitting power than the same antenna at 35 feet.”
You may be thinking, “I’ll never get my antenna 120' high.” That’s OK, do the best you can, but know that until you get it high, you’ll be missing out on earnings.
A good rule of thumb to start approaching 90% of optimum earnings is at least 20' above your roof and surrounding roofs.
Here’s an example of a good elevation placement in a suburban location:
That antenna is on top of a 23' pole on top of a 15' high roof in suburban San Diego.
Anecdotal reports show that even a 1 meter elevation difference can noticeably affect earnings.
Get as clear a view of as much “civilization” as possible. Remember, the network is only as valuable as the USEFUL area it can cover. A hotspot on top of a mountain with clear views of nothing but nature for 30 miles is not covering (to the network, anyway) USEFUL territory.
A hotspot on a suburban roof surrounded by a few million people and lots of data opportunities will provide far more useful coverage.
Correct elevation is vital for maximum coverage. LoRa is more or less a line-of-sight radio technology. While the radio waves will go through a few things (one wall, or a window, or a leafy tree), for the most part you want to be able to have a direct line of sight to both your coverage area AND other hotspots.
APPROPRIATE ANTENNA:
The antenna is what most people focus on thinking that if they just have the “best” antenna they’ll make the most HNT.
The antenna shipped with any purchased hotspot is already pretty good. However, as many Heliites are both tinkerers and driven by earnings, many will “upgrade” their antenna in order to reach more hotspots.
Antennas do 2 things: They transmit (tx) and they receive (rx). Most folks get wrapped up in how well an antenna transmits, but in the long term that doesn’t matter that much, as the value of Helium is in how well an antenna can RECEIVE.
Remember, the Helium network offers value by being able to receive transmission FROM sensors TO hotspots, then push that information onto the blockchain via an internet connection.
While there is and has been a place for being able to transmit powerfully, that value will diminish rapidly over the coming year.
Most of that is academic as almost no HS owners have the tech chops to fiddle with tx/rx settings, but what IS important is this:
As it stands (Feb 2021) the Helium blockchain, which is what determines whether or not you are participating (witnessing & beaconing) doesn’t have a way to see what kind of antenna you have, and will OFTEN assume that a hotspot with a powerful antenna (over 3 dbi) is somehow cheating the system because the signal that it should be tx/rx is more powerful & clear than a stock antenna will produce.
As many of you who have upgraded your antennas have found out,<strong> you can get worse earnings with a higher gain antenna due to this mismatch.
For our purposes, a higher gain antenna is anything over 6 dbi. Above 9 dbi and you’re breaking FCC rules unless you modify the transmit settings, which is beyond the scope of this article.
What the heck is “dBi”? It refers to the focus and shaping of the energy an antenna transmits and receives.
Here’s a quick dbi gain visualizer:
I can hear you now: “OK Nik, but what antenna should I buy?”
You’ve basically got 3 options.
First, and recommended: Don’t buy anything, just use the antenna your hotspot came with. Get your density and view squared away first.
Second, if you’ve got a great placement with the right elevation, buy a 5.8 dBi RAK antenna from Parley Labs.
Third, if you feel like you need something higher gain, get the 8 dBi RAK from Parley.
”But, but, what about the [insert fancy antenna] I read about on the Discord chat? Shouldn’t I get the most powerful antenna possible? I want more money! Gimme them GAINZ!”
No. Re-read the above piece on having a “too powerful” antenna. The one pictured above is a high gain sector (directional) antenna on top of a 3,000' mountain overlooking America’s Finest City.
It has been adjusted to fall within Helium & FCC regulations. Despite having an enormous “view”, it does worse than many placements that are much closer to other hotspots. Density matters more than antenna.
Even “hot” antennas that are tuned to fit within Helium guidelines (decreased transmit and receive power) won’t radically outperform other antennas.
One Hotspot owner I know ran a Nearson 9 vs a Rak 8 dBi in early 2021 and kept track of earnings between the two. The RAK beat the Nearson.
MINIMIZED CONNECTIONS:
Ok, now we’re coming to stuff that doesn’t really matter but you’ll ask about and geek out on anyway.
How should you connect your hotspot to your antenna?
This is RF 101 (Radio Frequency): You want a thick, clean, short (5' or less) cable that goes from your hotspot to your antenna. I recommend and use LMR400 from USACoax
If you’re running a cellular backhaul outside, use LMR-195 to go from the modem to wall of the enclosure, then transition to LMR-240 for the longer run up to the cellular antennas, which you should place external to the enclosure.
Get your hotspot up high near your antenna to keep cable runs to the antenna short. Run power and ethernet to the high hotspot, then have a short antenna cable to the antenna.
Do not (if you want max earnings) place your hotspot in your attic then run 20' of LMR to your antenna. That will create more radio power loss than you want.
So. That’s most of what you need to know about a optimum hotspot placement.
ADDENDA & FAQ
What else should I know about when it comes to Helium hotspot earnings?
How much HNT you get per witness/beacon transaction will change as the network develops more fully.
With a limited amount of HNT made available (5 million per month until August 2021, when it drops to 2.5 million/month) to reward transactions AND many more hotspots coming online in the next few months, earnings will steadily dilute.
That means your HNT earnings will CONTINUE TO DROP.
This MAY be offset by an increase in HNT price. It may not.
How can I earn even more? The long play with Helium is to figure out how to actually use the service. What kind of data can you collect, what kind of sensors should you use, how can you offer that as a service?
Can I just hire you for this? Yes. If you want help with Helium hotspot placement optimization or network usage, I’m available for hire.
How much power & data does a Helium Hotspot use? Hotspots use about as much power as an internet router, and as much data as a Netflix user who watches a movie most nights (20–30 GB/month).
If you live in the First World and have a broadband internet connection, having a Helium Hotspot will be basically unnoticeable to you from an energy cost/data use perspective.
Where should I buy a Helium Hotspot from? I’d recommend ordering a hotspot from ParleyLabs. They should ship by late spring of 2021, so you’ve got time to think about your “best” location.
Is it really worth it to put up a Helium hotspot? I sure think so. Will it be for you? If you have an optimal placement and follow all the advice above, probably. This isn’t investment advice. You could lose all the money you put in.
But…how much can I make? That’s an easier answer to give. Just go to Sitebot and start poking around to see what the current maximums are.
But…how do I turn HNT into cash? Open up an account on Binance.
RESOURCES
Gristle King — My website where I cover Helium in depth
Helium.place — Can be useful for seeing if your potential location may be too close to others.
Helium coverage map — This shows where hotspots are currently.
HIP17 density map, color coded for you paint-by-numbers types.
Original density hexmap created to help you visualize optimal density and how different size hex resolutions work.
Sitebot — Good to check out the highest earning hotspots (and any given hotspot.)
Coverage Mapping — This shows where coverage has been proven through the use of Helium mappers
